Corrosion passivation means that you stop the corrosion process and make metals immune for the usual influences that revamp corrosion.
Corrosion passivation fluid works through the chelation process. Here, particles form a bond with the iron behind the rust (if present). It pulls specifically the loose iron oxide apart from the surface. These nano particles form a flexible barrier on and inside the capillar and intermolecular structure of the metal surface. The formulation passivates the metal corrosion process.
The corrosion passivating cold alloy paint has a sol-gel base formula. Suitable for either new or blasted metal, or metal with already present (heavy) corrosion. The particles bond chemically with the metal surface. It adds a cold alloy that can only be removed through rupture. nC® Nano Corrosion Passivator Paint withstands welding temperatures.
The chelate technique used in nC® Nano Corrosion Passivator Fluid lasts 5 years and longer in saltwater environments, or go over 15 years of no corrosion when nC® Nano Corrosion Passivation Cold Alloy Paint or nC® Nano Corrosion Passivator Primer are the products of choice.
This without the absolute need for sandblasting or re-application of traditional coating.This makes the execution of corrosion passivation projects fast and cost effective, whilst the results last for very long periods of time.
Particularly, a big advantage of corrosion passivation is that you can apply it on wet surfaces. Consequently, it is also possible to passivate corrosion in for example ballast water tanks, rudders, peaks and other confined areas by means of floating. Of course traditional application, like rolling, brushing or spraying, is very well common use, on wet surfaces in case of the Fluid or Primer is used.
nC® Nano Corrosion Passivator Fluid
nC® Nano Corrosion Passivator Fluid is suitable to stop and passivate heavy corrosion and remove loose rust, specifically without the need of time-consuming sandblasting. It will last up to 6 years in saltwater, >15 years in freshwater.
nC® Nano Corrosion Passivator Primer
Specifically suitable for corroded metal. Removal of the present corrosion is not required. NCP Primer passivates corrosion, so no metal regression will take place anymore. NCP Primer bonds with the metal surface. You can paint over for colour finish.
nC® Nano Corrosion Passivator Cold Alloy
A cold alloy paint that passivates new or blasted metals. Blasting, grinding or chipping not needed when used with NCP primer. Bonds in metals, chemical resistant. Withstands welding temperatures. Protects against corrosion for more than 20 years.
SGS Lambda-test on nC® ProTherm ISO-X
July 23rd 2018 - Dutch based SGS Intron, part of the world’s leading inspection, verification, testing and certification company SGS, executed the EN12667 Lambda test for heat conductivity on a free sheet of nC® ProTherm ISO-X coating. Read more...
Sprayable nC® ProTherm Safe Touch Coating
August 11nd 2018 - Video shows the easy sprayable nC® ProTherm Safe Touch coating applied on a paint can. You can notice minimum overspray and/or mist development. You can pour in boiling water and pick up the can without hesitation.
nC Industrial © 2018 - All Rights Reserved