nC® Nano Corrosion Passivator Touch Up
nC® Nano Corrosion Passivator Touch Up (NCP Touch Up) is a sol-gel polymer-based fluid, designed to stop the corrosion process without the need for sandblasting, coating or other expensive and time-consuming work and blasting-equipment. It is specifically designed to touch up on wet spots.
nC® Nano Corrosion Passivator Touch Up is specifically designed to passivate corrosion in open, weather exposed areas like hulls, structures, window frames, winches, pumps, valves and other appliances, joints, welds. It is also very well suitable in confined areas like holds, tanks, peaks, voids, rudders, internal structures of frames and booms, joints and welds.
Material thickness will remain stationary for at least 2 years in above stated areas when exposed to salt water.
nC® Nano Corrosion Passivator Touch Up works through a process called chelation in which larger synthetic molecules form a bond with the iron behind the rust, thereby pulling the loose iron oxide from the surface. nC®
nC® Nano Corrosion Passivator Touch Up forms a flexible barrier inside the capillar and intermolecular structure of the metal surface. The bonding passivates the corrosion process and the metal. The bonded passivating structure will remain in place for at least 2 years.
FACTS & FIGURES
Cross-cut test DIN EN ISO 2409: 0
Accelerated sat-spray test DIN EN ISO 9227: No rust
VDA-test 621-415: No defects after 2000 hours
nC Industrial © 2018 - All Rights Reserved