nC® Protect 4100 Electrical Equipment Spray

nC® Protect 4100 Electrical Equipment Spray

DESCRIPTION

nC® Protect 4100 Electrical Equipment Spray is a transparent nano-formulated spray developed to protect electrical equipment and devices from moisture (steam, condensate water, rain, chlorinated and salt or sea water etc.), and oxidation in marine environments. It restores dielectric resistance and increases service life of electrical equipment. It functions in temperatures between -50°C to 730° C.

 

nC® Protect 4100 Electrical Equipment Spray bonds chemically into materials and their surfaces. Its ultra-thin finish and lasting soiling protection to smooth, non-suction surfaces is used to protect against negative chemical and environmental influences. It is user ready and can be applied by spraying or bathing.

BENEFITS

TECHNICAL

 

  • Forms ionic chemical bond with substrate
  • Extremely corrosion and chemical resistant
  • Restores conductivity
  • Prevents dirt adhering to surface
  • Transparent
  • Frost resistant
  • Does not evaporate
  • Lasts for years

OPERATIONAL

 

  • Minimizes unwanted and dangerous power-outings
  • Improves safety
  • Functions in temperatures between -50°C to 730° C
  • Protects in case of insulation leakage or insulation breakdown
  • Withstands damp, standing water and submerging for longer periods of time
  • Easy to apply
  •  

 

FINANCIAL

 

  • Low cost per m²
  • Minimizes downtime
  • Significantly reduces replacement cost of electric equipment
  • Reduces corrosion related costs to minimum
  • Avoids fines and penalties given for malfunctioning lights or equipment

APPLICATION INSTRUCTIONS

  • The product can be applied while equipment is in operation.
  • Open casings, fittings and naked wires as much as possible in order to get maximum exposure during spraying.
  • Pre-cleaning and degreasing improves working and longevity of the spray.
  • Use in well ventilated area.
  • CAUTION: Vapors, damps coming from nC Protect 4100 Electric Equipment are EXTREMELY FLAMMABLE.
  • nC® Protect 4100 Electrical Equipment Spray displaces moisture, lubricates mechanisms and securely proofs electrical components even in damp environment.
  • Wear tight fitting goggles, wear protective gloves.
  • Spray on areas that need protection or restoration.
  • Test of maximum performance should be performed after full cure.
  • Apply when ambient temperature is above 0° C, as water or moist will freeze below zero, thus preventing nC® ProTect 4100 from reaching the material surface.
  • Full strength will be reached after 10 minutes.
  • Cure time won’t interfere with normal operations, you can continue to use your equipment as usual while the product cures.

LOGISTIC INFO

  • Store nC Protect 4100 Electrical Equipment Spray at temperatures between 5° C and 30° C.
  • nC Protect 4100 Electrical Equipment Spray can be stored for 3 years
  • nC Protect 4100 Electrical Equipment Spray is available in boxes of 12*500ml spray cans.
  • Lead time 1 to 3 weeks.

 

Transport of dangerous goods by road, rail and inland waterway (ADR/RID/ADN)

  • UN/ID no UN1950
  • Proper shipping name Aerosols, flammable
  • Hazard Class 2.1
  • Description UN1950, Aerosols, flammable, 2.1, Limited Qty.

International Maritime Dangerous Goods Code (IMDG)

  • UN/ID no UN1950
  • Proper shipping name Aerosols
  • Hazard Class 2.1
  • Description UN1950, Aerosols, 2.1, Limited Qty
  • International Civil Aviation Organization (ICAO-IATA/DGR)
  • UN/ID no UN1950
  • Proper shipping name Aerosols, flammable
  • Hazard Class 2.1 ERG Code 10L
  • Description UN1950, Aerosols, flammable, 2.1, limited Qty

 

  • Environmentally hazardous: No
  • Marine pollutant: No

nC Industrial  © 2018 - All Rights Reserved