nC® ProTherm

nC® ProTherm Thermal Insulating Coatings

nC® ProTherm is a series of sprayable and brushable thermal insulating coatings. With additional properties as acoustic insulation, Safe-Touch, fire retardancy, high-heat applications and/or corrosion passivation, you can always find the suitable thermal insulating coating for your situation.

Properties

Especially with the sol-gel nanotechnology basis, these thermal insulating coatings are here to stay. Long lasting lifetime cycles of more than 15 years outdoors. Life-long expectancy indoors. Because of the ability to insulate with a very thin layer of coating, the nC® ProTherm coatings offer space saving and cost reducing at a high degree of insulation. Consequently, with an U-value at 4,15 W/(m²K) at 13 mm, or a lambda (λ)-value at 0,056 W/(mK), it keeps heat and cold in place. Different from traditional insulating coatings and aerogel based coatings, nC® ProTherm coatings are water-repelling and can operate in under water situations. Overall, they are UV-resistant.

Cost cutting

nC ProTherm series of nanotech thermal insulation coatings are capable of withstanding harsh (outdoor, chemical, marine, monsoon, desert) environments and are simple to apply. Hence, these coatings greatly reduce the maintenance and replacement costs over time due to their long life, their corrosion passivating capacities and the potential for visual inspection of your assets, as pipes and tubes do no longer hide behind cladding. But first of all, they reduce your energy related costs.

 

nC® ProTherm ISO-X

 

Sprayable thermal insulating coating for buildings. 1 coat application. 3mm for already insulated buildings that need touch-up, up to 12mm for not insulated buildings.Ruggedized for indoor and outdoor use. No primer needed.

nC® ProTherm CUI-X

 

Sprayable thermal insulating coating for metals. Carries corrosion passivator to stop and prevent corrosion. Chemical resistant. 1 coat application. No primer needed. For surfaces up to 150°C. In- and outdoor use.

nC® ProTherm FIRE-X

 

A fire resistant coating that can withstand temperatures up to 1300°C whilst keeping the structure’s integrity intact for a long period of time. For instance polyester won’t melt! It is suitable for metal, stone, concrete, synthetic and wooden surfaces.

nC® ProTherm ISO-XF

 

Sprayable thermal insulating coating for buildings, fire retardant. 1 coat application. 3mm for already insulated buildings that need touch-up, up to 12mm for not insulated buildings. Ruggedized for indoor and outdoor use. No primer needed.

nC® ProTherm CUI-XF

 

Sprayable thermal insulating coating for metals. Fire retardant. Carries corrosion passivator. For in- and outdoor use. Chemical resistant. 1 coat application. No primer needed. For surfaces up to 150°C.

nC® ProTherm Safe Touch

 

Truly improves safety. Can reduce surface temperatures from 150°C to below 47°C, thus preventing skin burns. Chemical resistant. A one-coat application between 3mm up to 8mm is sufficient to create a safe place in hot work areas.

nC® ProTherm dB-X

 

Coating for thermal insulation and hindering noise conductivity. It is suitable for metal, stone, concrete, synthetic and wooden surfaces. Application by brush, roller or spraygun. Ruggedized for indoor and outdoor use. No primer needed.

nC® ProTherm CUI-HTF

 

Sprayable thermal insulating coating for metals. Fire retardant. Carries corrosion passivator. For in- and outdoor use. Chemical resistant. 1 coat application. No primer needed. For surfaces up to 260°C.

nC® ProTherm Safe Touch HT

 

Truly improves safety. Can reduce surface temperatures from 260°C to below 47°C, thus preventing skin burns. Chemical resistant. A one-coat application between 3mm up to 8mm is sufficient to create a safe place in hot work areas.

nC® ProTherm News

SGS Lambda-test on nC® ProTherm ISO-X

 

July 23rd 2018 - Dutch based SGS Intron, part of the world’s leading inspection, verification, testing and certification company SGS, executed the EN12667 Lambda test for heat conductivity on a free sheet of nC® ProTherm ISO-X coating. Read more...

Sprayable nC® ProTherm Safe Touch Coating

 

August 11nd 2018 - Video shows the easy sprayable nC® ProTherm Safe Touch coating applied on a paint can. You can notice minimum overspray and/or mist development. You can pour in boiling water and pick up the can without hesitation.

nC Industrial © 2018 - All Rights Reserved